Lightweight Fairing Filler
Fast-curing lightweight filler for fairing, profiling, osmosis repairs, plugs and patterns.
A fast-curing, lightweight epoxy filler for profiling and fairing above and below the waterline, on composite, steel and aluminium. It builds thick without slumping, sands easily and forms a watertight barrier for osmosis treatment. It also mills cleanly for plugs and patterns. Contains no CMR materials. Overcoat with Water-Based High-Build Primer.
Datasheets available on request
Key benefits
- Up to 25 mm in one coat without slumping
- Sands easily, several coats in a day
- Watertight barrier for osmosis treatment
- Easy to sand or CNC mill for plugs and patterns
- Lightweight, at a density of 0.8
- 25% bio-based carbon in the resin part*
Pack sizes
1, 5, 30 and 300 kg kits
Supplied to order: contact us for stock and lead times.
Pairs with
Specifications
| Mix ratio | 1 : 1 by weight or volume |
|---|---|
| Gel time | 18 min |
| Max per coat | 25 mm |
| Density | 0.8 |
| Coverage | 0.8 kg/m² per mm |
| Use between | 10 and 35 °C |
| Bio-based carbon* | 25% resin part, 14% mixed |
* Bio-based carbon is the share of carbon atoms that come from plant sources rather than fossil sources. "Resin part" is Part A on its own; "mixed" covers resin and hardener together and is usually lower, because most hardeners contain less bio-based carbon. Figures from the manufacturer's technical datasheets. The Crystal Clear Epoxy figure is tested to ASTM D6866.
CMR means carcinogenic, mutagenic or toxic to reproduction.
Technical data from the manufacturer's datasheets, measured at 23 °C unless stated. Always test before use and read the safety data sheet.