The resin range / Coat
Water-Based High-Build Primer
Anti-osmosis epoxy high build under epoxy or polyurethane topcoats.
Water-based
An epoxy high build that protects hulls from osmosis and chemicals and gives a smooth base for epoxy or polyurethane topcoats, above and below the waterline. Solvent-free and VOC-free; thins and cleans up with water.
Request a free sample
Datasheets available on request
Coat
Key benefits
- Solvent-free and VOC-free
- Thins and cleans up with water
- Goes straight over the Lightweight Fairing Filler
- Brush, roller or spray gun
Pack sizes
1.1, 4.4 and 10 kg kits
Supplied to order: contact us for stock and lead times.
Pairs with
Specifications
| Mix ratio | 100 : 11 by weight, then thin 10 to 35% with water |
|---|---|
| Pot life | 1 h |
| Touch dry | 50 min |
| Full cure | 24 h |
| Coverage | 250 g/m² per coat before thinning; two coats close the surface |
| Conditions | Don't apply above 70% humidity |
Our water-based products replace solvents with water and contain no VOCs. We don't describe them as bio-based.
CMR means carcinogenic, mutagenic or toxic to reproduction.
Technical data from the manufacturer's datasheets, measured at 23 °C unless stated. Always test before use and read the safety data sheet.