Water-Based Epoxy Paint
Hard-wearing, solvent-free epoxy paint for bilges, floors, sets and props, gloss or matt.
Solvent-free epoxy paint for steel, concrete and composites, gloss or matt. High oil, acid and wear resistance make it the go-to for bilges and industrial floors. A gel version replaces polyester gelcoat in moulds. No CMR components or VOCs.
Datasheets available on request
Key benefits
- High oil, acid and wear resistance
- Gloss or matt, by choice of hardener
- Neutral bases tint to any RAL colour
- Gel version for in-mould use, as an alternative to polyester gelcoat
- Closes the surface of Water-Based Spray Filler with a hard finish
- No CMR components or VOCs
Pack sizes
1.8 to 36 kg kits; neutral bases tint to any RAL colour
Supplied to order: contact us for stock and lead times.
Pairs with
Specifications
| Mix ratio | 100 : 80 gloss or 100 : 100 matt, by weight (white) |
|---|---|
| Pot life | 1 h |
| Dry | 15 min |
| Fully hard | 24 h |
| Coverage | 10 m²/kg per coat at 50 µm |
| Use | Interiors only, away from intense direct sun |
Our water-based products replace solvents with water and contain no VOCs. We don't describe them as bio-based.
CMR means carcinogenic, mutagenic or toxic to reproduction.
Technical data from the manufacturer's datasheets, measured at 23 °C unless stated. Always test before use and read the safety data sheet.